Value Pak - 24 oz. Total.

Includes: 2 ~ 12 oz. Bottles. 

Complete ComfortPLUS™ Multi-Purpose Solution.

• Removes Protein.
• Cleans.
• Rinses.
• Disinfects.
• Stores.
• All Steps In One Bottle.
• Keeps soft contact lenses fresh and comfortable every day.
• Sterile.

Ingredients and Benefits:

• Buffer (Phosphate) - Works with the electrolytes to remove protein daily and helps prevent lens filming as lenses soak.  This provides fresh, comfortable wear every day. 
• Electrolytes (Potassium chloride, sodium chloride, edetate disodium) - Contributes to protein removal.  Adjusts solution to more closely match the eye's natural tears for your lens wearing comfort.
• Gentle Surfactant (Poloxamer 237) - Enhances cleaning activity when lenses are rubbed.  Removes dirt and debris while lenses soak.
• Lubricant (HPMC/hydroxypropyl methylcellulose) - Conditions and wets lens surface for enhanced cleaning and comfort.  Helps relieve dryness for all-day wear.
• Disinfectant/Preservative (PHMB/polyhexamethylene biguanide 0.0001%) - Effectively eliminated bacteria and germs on the lens. 

Step 1.  Clean and Rinse - Place at least three drops of solution on each lens surface and rub each side of the lens gently for at least 10 seconds.  Rinse both lens surfaces thoroughly with fresh solution to remove all debris. 
Step 2.  Soak and Remove Protein - Place lenses in clean lens case and fill with COMPLETE® brand ComfortPLUS™ Solution until the lenses are fully covered.  Allow lenses to soak for a minimum of 4 hours for disinfection and protein removal. 

Daily use of COMPLETE® brand ComfortPLUS™ Solution eliminated the need for a separate enzymatic cleaner for many lens wearers - consult your eye care practitioner.  You may apply your lenses onto your eyes directly from the lens case.  If any debris remains on the lenses, rinse with fresh solution. For additional comfort, prior to lens wear, place 1-2 drops of COMPLETE® brand ComfortPLUS™ Solution on the inner surface of your lenses.

You may leave your lenses in the unopened lens case containing COMPLETE® brand ComfortPLUS™ Solution for up to 30 days.  After this time your lenses must be cleaned and disinfected with fresh solution every 30 days and prior to wear. 

Good Lens Care Practices: 

• Always wash and rinse your hands before you handle your lenses.
• Clean, rinse and disinfect your lenses each time you remove them.
• Always handle the same lens, the right or left, first in order to avoid mix-ups. 
• After use, always empty and rinse lens case with fresh COMPLETE® brand ComfortPLUS™ Solution, and allow to air dry. 

• Apply at least three drops of COMPLETE brand Multi-Purpose Solution to each lens surface. Rub each side of the lens gently for at least 10 seconds.

Step 2

• After you clean your lens, rinse both lens surfaces with a sufficient amount of COMPLETE brand Multi-Purpose Solution to remove all debris.

Step 3

• Fill the lens case with COMPLETE brand Multi-Purpose Solution. Place the lens in the case ensuring that the lens is completely immersed in the solution. Secure the cap on the lens case.
• To insure proper disinfection, allow the lens to remain in the COMPLETE brand Multi-Purpose Solution in your unopened lens case for a minimum of four hours.
• You may store your lenses in the unopened case until ready to wear, up to a maximum of 30 days. If your lenses are stored for longer periods of time, they must be cleaned and disinfected with fresh solution every 30 days and prior to wear.